dmesg - Samsung SSD 860
Booting Linux on physical CPU 0x0
Linux version 4.14.0-49.el7.centos.180925+amp.ilp32.aarch64 (buildsw@scc-sw-build-40) (gcc version 7.3.0 (amp-7.3.0-20180630)) #1 SMP Tue Sep 25 22:47:50 PDT 2018
Boot CPU: AArch64 Processor [503f0001]
efi: Getting EFI parameters from FDT:
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x9fffce0000 SMBIOS 3.0=0x9fffd6d498 ESRT=0x9ffad3df18
esrt: Reserving ESRT space from 0x0000009ffad3df18 to 0x0000009ffad3df50.
crashkernel reserved: 0x00000000dfe00000 - 0x00000000ffe00000 (512 MB)
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000009FFFCE0000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000009FFFCE0028 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000009FFFCE00C0 000114 (v06 Ampere eMAG 00000003 INTL 20171215)
ACPI: DSDT 0x0000009FFFCE01D8 007648 (v05 ALASKA A M I 00000001 INTL 20171215)
ACPI: FIDT 0x0000009FFFCE7820 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DBG2 0x0000009FFFCE78C0 000061 (v00 Ampere eMAG 00000000 INTL 20171215)
ACPI: GTDT 0x0000009FFFCE7928 000108 (v02 Ampere eMAG 00000001 INTL 20171215)
ACPI: IORT 0x0000009FFFCE7A30 000ABC (v00 Ampere eMAG 00000000 INTL 20171215)
ACPI: MCFG 0x0000009FFFCE84F0 0000AC (v01 Ampere eMAG 00000001 INTL 20171215)
ACPI: SSDT 0x0000009FFFCE85A0 00002D (v02 Ampere eMAG 00000001 INTL 20171215)
ACPI: SPMI 0x0000009FFFCE85D0 000041 (v05 ALASKA A M I 00000000 AMI. 00000000)
ACPI: APIC 0x0000009FFFCE8618 000A68 (v04 Ampere eMAG 00000004 01000013)
ACPI: PCCT 0x0000009FFFCE9080 0005D0 (v01 Ampere eMAG 00000003 01000013)
ACPI: BERT 0x0000009FFFCE9650 000030 (v01 Ampere eMAG 00000003 INTL 20171215)
ACPI: HEST 0x0000009FFFCE9680 000328 (v01 Ampere eMAG 00000003 INTL 20171215)
ACPI: SPCR 0x0000009FFFCE99A8 000050 (v02 A M I APTIO V 01072009 AMI. 0005000D)
ACPI: PPTT 0x0000009FFFCE99F8 000CB8 (v01 Ampere eMAG 00000003 01000013)
ACPI: SPCR: console: pl011,mmio,0x12600000,115200
On node 0 totalpages: 2093056
DMA zone: 28 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 28672 pages, LIFO batch:1
Normal zone: 2016 pages used for memmap
Normal zone: 2064384 pages, LIFO batch:1
psci: probing for conduit method from ACPI.
psci: PSCIv1.0 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: Trusted OS migration not required
random: fast init done
percpu: Embedded 2 pages/cpu @ffff809f73fd0000 s58648 r8192 d64232 u131072
pcpu-alloc: s58648 r8192 d64232 u131072 alloc=2*65536
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23
pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31
Detected PIPT I-cache on CPU0
Built 1 zonelists, mobility grouping on. Total pages: 2091012
Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.0-49.el7.centos.180925+amp.ilp32.aarch64 root=/dev/mapper/centos_osprey09--ospa2--a00133-root ro iommu.passthrough=1 cma=0 pcie_port_pm=off crashkernel=auto rd.lvm.lv=centos_osprey09-ospa2-a00133/root rd.lvm.lv=centos_osprey09-ospa2-a00133/swap selinux=0 LANG=en_US.UTF-8 maxcpus=4
PID hash table entries: 4096 (order: -1, 32768 bytes)
Dentry cache hash table entries: 8388608 (order: 10, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 9, 33554432 bytes)
software IO TLB [mem 0xdbe00000-0xdfe00000] (64MB) mapped at [ffff80005be00000-ffff80005fdfffff]
Memory: 133019520K/133955584K available (7484K kernel code, 1500K rwdata, 2944K rodata, 1024K init, 7431K bss, 936064K reserved, 0K cma-reserved)
Virtual kernel memory layout:
modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
vmalloc : 0xffff000008000000 - 0xffff7bdfffff0000 (126847 GB)
.text : 0xffff000008080000 - 0xffff0000087d0000 ( 7488 KB)
.rodata : 0xffff0000087d0000 - 0xffff000008ac0000 ( 3008 KB)
.init : 0xffff000008ac0000 - 0xffff000008bc0000 ( 1024 KB)
.data : 0xffff000008bc0000 - 0xffff000008d37200 ( 1501 KB)
.bss : 0xffff000008d37200 - 0xffff000009479180 ( 7432 KB)
fixed : 0xffff7fdffe790000 - 0xffff7fdffec00000 ( 4544 KB)
PCI I/O : 0xffff7fdffee00000 - 0xffff7fdfffe00000 ( 16 MB)
vmemmap : 0xffff7fe000000000 - 0xffff800000000000 ( 128 GB maximum)
0xffff7fe000040000 - 0xffff7fe027e00000 ( 637 MB actual)
memory : 0xffff800010000000 - 0xffff809f80000000 (653056 MB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=32.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: Distributor has no Range Selector support
GICv3: no VLPI support, no direct LPI support
ITS [mem 0x78020000-0x7803ffff]
ITS@0x0000000078020000: allocated 1048576 Devices @9fc0800000 (flat, esz 8, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GIC: using LPI property table @0x0000009fc0280000
ITS: Allocated 1792 chunks for LPIs
GICv3: CPU0: found redistributor 0 region 0:0x0000000078400000
CPU0: using LPI pending table @0x0000009fc0290000
GIC: using cache flushing for LPI property table
Offload RCU callbacks from CPUs: .
ACPI GTDT: found 1 memory-mapped timer block(s).
arch_timer: cp15 and mmio timer(s) running at 50.00MHz (phys/phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 131072 (order: 4, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 4, 1048576 bytes)
ASID allocator initialised with 32768 entries
Hierarchical SRCU implementation.
PCI/MSI: ITS@0x78020000 domain created
Platform MSI: ITS@0x78020000 domain created
Remapping and enabling EFI services.
EFI remap 0x0000000010540000 => 0000000020000000
EFI remap 0x0000000092000000 => 0000000020200000
EFI remap 0x00000000fffb0000 => 0000000020ac0000
EFI remap 0x00000000fffd0000 => 0000000020ae0000
EFI remap 0x00000000fffe0000 => 0000000020af0000
EFI remap 0x0000009ff1a20000 => 0000000020b10000
EFI remap 0x0000009ff80b0000 => 0000000020b50000
EFI remap 0x0000009ff81c0000 => 0000000020b60000
EFI remap 0x0000009ff8710000 => 0000000020ff0000
EFI remap 0x0000009ffad60000 => 0000000021040000
EFI remap 0x0000009ffae60000 => 0000000021050000
EFI remap 0x0000009ffae70000 => 0000000021060000
EFI remap 0x0000009ffaed0000 => 00000000210c0000
EFI remap 0x0000009ffbee0000 => 00000000220d0000
EFI remap 0x0000009ffbf60000 => 0000000022150000
EFI remap 0x0000009ffbf80000 => 0000000022170000
EFI remap 0x0000009ffbfb0000 => 00000000221a0000
EFI remap 0x0000009ffccb0000 => 0000000022ea0000
EFI remap 0x0000009ffcce0000 => 0000000022ed0000
EFI remap 0x0000009ffccf0000 => 0000000022ee0000
EFI remap 0x0000009ffcd20000 => 0000000022f10000
EFI remap 0x0000009ffcd40000 => 0000000022f30000
EFI remap 0x0000009ffcd90000 => 0000000022f80000
EFI remap 0x0000009ffd130000 => 0000000023320000
EFI remap 0x0000009ffd190000 => 0000000023380000
EFI remap 0x0000009ffe1a0000 => 0000000024390000
EFI remap 0x0000009fffd50000 => 00000000243a0000
EFI remap 0x0000009fffd70000 => 00000000243c0000
smp: Bringing up secondary CPUs ...
Detected PIPT I-cache on CPU1
GICv3: CPU1: found redistributor 1 region 0:0x0000000078420000
CPU1: using LPI pending table @0x0000009fc11e0000
CPU1: Booted secondary processor [503f0001]
Detected PIPT I-cache on CPU2
GICv3: CPU2: found redistributor 100 region 0:0x0000000078440000
CPU2: using LPI pending table @0x0000009fc1250000
CPU2: Booted secondary processor [503f0001]
Detected PIPT I-cache on CPU3
GICv3: CPU3: found redistributor 101 region 0:0x0000000078460000
CPU3: using LPI pending table @0x0000009fc12d0000
CPU3: Booted secondary processor [503f0001]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected feature: GIC system register CPU interface
CPU features: detected feature: 32-bit EL0 Support
CPU features: detected feature: Kernel page table isolation (KPTI)
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 8192 (order: 4, 1048576 bytes)
pinctrl core: initialized pinctrl subsystem
SMBIOS 3.1.1 present.
DMI: AmpereComputing(R) OSPREY EV-883832-X3-0001/OSPREY, BIOS 4.8.19 09/25/2018
NET: Registered protocol family 16
cpuidle: using governor menu
Detected 16 PCC Subspaces
Registering PCC driver as Mailbox controller
vdso: 2 pages (1 code @ ffff000008bf0000, 1 data @ ffff000008be0000)
vdso: 2 pages (1 code @ ffff0000087e0000, 1 data @ ffff000008be0000)
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
DMA: preallocated 256 KiB pool for atomic allocations
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 512 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 32 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: Using GIC for interrupt routing
ACPI: MCFG table detected, 8 entries
HEST: Table parsing has been initialized.
ARMH0011:00: ttyAMA0 at MMIO 0x12600000 (irq = 291, base_baud = 0) is a SBSA
console [ttyAMA0] enabled
ARMH0011:01: ttyAMA1 at MMIO 0x12610000 (irq = 292, base_baud = 0) is a SBSA
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: ECAM area [mem 0x10000000000-0x1000fffffff] reserved by PNP0C02:00
acpi PNP0A08:00: ECAM at [mem 0x10000000000-0x1000fffffff] for [bus 00-ff]
Remapped I/O 0x0000010010000000 to [io 0x0000-0xffff window]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x10030000000-0x100efffffff window] (bus address [0x30000000-0xefffffff])
pci_bus 0000:00: root bus resource [mem 0x10100000000-0x17fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0000:00:00.0: enabling Extended Tags
pci 0000:00:00.0: supports D1 D2
pci_bus 0000:00: on NUMA node 0
pci 0000:00:00.0: PCI bridge to [bus 01]
ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus 00-ff])
acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:02: ECAM area [mem 0x1000000000-0x100fffffff] reserved by PNP0C02:00
acpi PNP0A08:02: ECAM at [mem 0x1000000000-0x100fffffff] for [bus 00-ff]
Remapped I/O 0x0000001010000000 to [io 0x10000-0x1ffff window]
PCI host bridge to bus 0002:00
pci_bus 0002:00: root bus resource [io 0x10000-0x1ffff window] (bus address [0x0000-0xffff])
pci_bus 0002:00: root bus resource [mem 0x1030000000-0x10efffffff window] (bus address [0x30000000-0xefffffff])
pci_bus 0002:00: root bus resource [mem 0x1100000000-0x57ffffffff window]
pci_bus 0002:00: root bus resource [bus 00-ff]
pci 0002:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0002:00:00.0: enabling Extended Tags
pci 0002:00:00.0: supports D1 D2
pci_bus 0002:00: on NUMA node 0
pci 0002:00:00.0: PCI bridge to [bus 01]
ACPI: PCI Root Bridge [PCI4] (domain 0004 [bus 00-ff])
acpi PNP0A08:04: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:04: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:04: ECAM area [mem 0x6000000000-0x600fffffff] reserved by PNP0C02:00
acpi PNP0A08:04: ECAM at [mem 0x6000000000-0x600fffffff] for [bus 00-ff]
Remapped I/O 0x0000006010000000 to [io 0x20000-0x2ffff window]
PCI host bridge to bus 0004:00
pci_bus 0004:00: root bus resource [io 0x20000-0x2ffff window] (bus address [0x0000-0xffff])
pci_bus 0004:00: root bus resource [mem 0x6030000000-0x60efffffff window] (bus address [0x30000000-0xefffffff])
pci_bus 0004:00: root bus resource [mem 0x6100000000-0x6fffffffff window]
pci_bus 0004:00: root bus resource [bus 00-ff]
pci 0004:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0004:00:00.0: enabling Extended Tags
pci 0004:00:00.0: supports D1 D2
pci_bus 0004:00: on NUMA node 0
pci 0004:00:00.0: PCI bridge to [bus 01]
ACPI: PCI Root Bridge [PCI6] (domain 0006 [bus 00-ff])
acpi PNP0A08:06: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:06: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:06: ECAM area [mem 0x600000000-0x60fffffff] reserved by PNP0C02:00
acpi PNP0A08:06: ECAM at [mem 0x600000000-0x60fffffff] for [bus 00-ff]
Remapped I/O 0x0000000610000000 to [io 0x30000-0x3ffff window]
PCI host bridge to bus 0006:00
pci_bus 0006:00: root bus resource [io 0x30000-0x3ffff window] (bus address [0x0000-0xffff])
pci_bus 0006:00: root bus resource [mem 0x630000000-0x6efffffff window] (bus address [0x30000000-0xefffffff])
pci_bus 0006:00: root bus resource [mem 0x700000000-0x7ffffffff window]
pci_bus 0006:00: root bus resource [bus 00-ff]
pci 0006:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0006:00:00.0: enabling Extended Tags
pci 0006:00:00.0: supports D1 D2
pci 0006:01:00.0: [8086:1533] type 00 class 0x020000
pci 0006:01:00.0: reg 0x10: [mem 0x630100000-0x6301fffff]
pci 0006:01:00.0: reg 0x1c: [mem 0x630200000-0x630203fff]
pci 0006:01:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
pci 0006:01:00.0: PME# supported from D0 D3hot D3cold
pci_bus 0006:00: on NUMA node 0
pci 0006:00:00.0: BAR 14: assigned [mem 0x630000000-0x6302fffff]
pci 0006:01:00.0: BAR 0: assigned [mem 0x630000000-0x6300fffff]
pci 0006:01:00.0: BAR 6: assigned [mem 0x630100000-0x6301fffff pref]
pci 0006:01:00.0: BAR 3: assigned [mem 0x630200000-0x630203fff]
pci 0006:00:00.0: PCI bridge to [bus 01]
pci 0006:00:00.0: bridge window [mem 0x630000000-0x6302fffff]
ACPI: PCI Root Bridge [PCI7] (domain 0007 [bus 00-ff])
acpi PNP0A08:07: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:07: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:07: ECAM area [mem 0x400000000-0x40fffffff] reserved by PNP0C02:00
acpi PNP0A08:07: ECAM at [mem 0x400000000-0x40fffffff] for [bus 00-ff]
Remapped I/O 0x0000000410000000 to [io 0x40000-0x4ffff window]
PCI host bridge to bus 0007:00
pci_bus 0007:00: root bus resource [io 0x40000-0x4ffff window] (bus address [0x0000-0xffff])
pci_bus 0007:00: root bus resource [mem 0x430000000-0x4efffffff window] (bus address [0x30000000-0xefffffff])
pci_bus 0007:00: root bus resource [mem 0x500000000-0x5ffffffff window]
pci_bus 0007:00: root bus resource [bus 00-ff]
pci 0007:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0007:00:00.0: enabling Extended Tags
pci 0007:00:00.0: supports D1 D2
pci 0007:01:00.0: [1a03:1150] type 01 class 0x060400
pci 0007:01:00.0: enabling Extended Tags
pci 0007:01:00.0: supports D1 D2
pci 0007:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0007:02:00.0: [1a03:2000] type 00 class 0x030000
pci 0007:02:00.0: reg 0x10: [mem 0x430000000-0x430ffffff]
pci 0007:02:00.0: reg 0x14: [mem 0x431040000-0x43105ffff]
pci 0007:02:00.0: reg 0x18: [io 0x10000000-0x1000007f]
pci 0007:02:00.0: reg 0x30: [mem 0x431000000-0x43103ffff pref]
pci 0007:02:00.0: BAR 0: assigned to efifb
pci 0007:02:00.0: supports D1 D2
pci 0007:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci_bus 0007:00: on NUMA node 0
pci 0007:00:00.0: BAR 14: assigned [mem 0x430000000-0x4317fffff]
pci 0007:00:00.0: BAR 13: assigned [io 0x40000-0x40fff]
pci 0007:01:00.0: BAR 14: assigned [mem 0x430000000-0x4317fffff]
pci 0007:01:00.0: BAR 13: assigned [io 0x40000-0x40fff]
pci 0007:02:00.0: BAR 0: assigned [mem 0x430000000-0x430ffffff]
pci 0007:02:00.0: BAR 6: assigned [mem 0x431000000-0x43103ffff pref]
pci 0007:02:00.0: BAR 1: assigned [mem 0x431040000-0x43105ffff]
pci 0007:02:00.0: BAR 2: assigned [io 0x40000-0x4007f]
pci 0007:01:00.0: PCI bridge to [bus 02]
pci 0007:01:00.0: bridge window [io 0x40000-0x40fff]
pci 0007:01:00.0: bridge window [mem 0x430000000-0x4317fffff]
pci 0007:00:00.0: PCI bridge to [bus 01-02]
pci 0007:00:00.0: bridge window [io 0x40000-0x40fff]
pci 0007:00:00.0: bridge window [mem 0x430000000-0x4317fffff]
pci 0007:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0007:02:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0x10000000000-0x1000fffffff window] could not be reserved
system 00:00: [mem 0x7800000000-0x780fffffff window] has been reserved
system 00:00: [mem 0x7000000000-0x700fffffff window] has been reserved
system 00:00: [mem 0x6000000000-0x600fffffff window] could not be reserved
system 00:00: [mem 0x5800000000-0x580fffffff window] has been reserved
system 00:00: [mem 0x1000000000-0x100fffffff window] could not be reserved
system 00:00: [mem 0x600000000-0x60fffffff window] could not be reserved
system 00:00: [mem 0x400000000-0x40fffffff window] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 1 devices
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 6, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 5, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 5, 2097152 bytes)
NET: Registered protocol family 1
PCI: CLS 64 bytes, default 128
Unpacking initramfs...
Freeing initrd memory: 20096K
hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
kvm [1]: 8-bit VMID
kvm [1]: IDMAP page: 907a0000
kvm [1]: HYP VA range: 800000000000:ffffffffffff
kvm [1]: GICv3: no GICV resource entry
kvm [1]: disabling GICv2 emulation
kvm [1]: GIC system register CPU interface enabled
kvm [1]: vgic interrupt IRQ1
kvm [1]: virtual timer IRQ3
kvm [1]: Hyp mode initialized successfully
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(2.320:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=21 bucket_order=0
zbud: loaded
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
atomic64_test: passed
efifb: probing for efifb
efifb: framebuffer at 0x430000000, using 1920k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
acpi-ged ACPI0013:00: GED listening GSI 84 @ IRQ 297
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
GHES: APEI firmware first mode is enabled by APEI bit.
ACPI GTDT: found 1 SBSA generic Watchdog(s).
arm-smmu arm-smmu.0.auto: probing hardware configuration...
arm-smmu arm-smmu.0.auto: SMMUv2 with:
arm-smmu arm-smmu.0.auto: stage 2 translation
arm-smmu arm-smmu.0.auto: coherent table walk
arm-smmu arm-smmu.0.auto: (IDR0.CTTW overridden by FW configuration)
arm-smmu arm-smmu.0.auto: stream matching with 128 register groups
arm-smmu arm-smmu.0.auto: 128 context banks (128 stage-2 only)
arm-smmu arm-smmu.0.auto: Supported page sizes: 0x60211000
arm-smmu arm-smmu.0.auto: Stage-2: 48-bit IPA -> 48-bit PA
arm-smmu arm-smmu.1.auto: probing hardware configuration...
arm-smmu arm-smmu.1.auto: SMMUv2 with:
arm-smmu arm-smmu.1.auto: stage 2 translation
arm-smmu arm-smmu.1.auto: coherent table walk
arm-smmu arm-smmu.1.auto: (IDR0.CTTW overridden by FW configuration)
arm-smmu arm-smmu.1.auto: stream matching with 128 register groups
arm-smmu arm-smmu.1.auto: 128 context banks (128 stage-2 only)
arm-smmu arm-smmu.1.auto: Supported page sizes: 0x60211000
arm-smmu arm-smmu.1.auto: Stage-2: 48-bit IPA -> 48-bit PA
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci-hcd 808622B7:00: xHCI Host Controller
xhci-hcd 808622B7:00: new USB bus registered, assigned bus number 1
xhci-hcd 808622B7:00: hcc params 0x0220fe6d hci version 0x110 quirks 0x00010010
xhci-hcd 808622B7:00: irq 295, io mem 0x13800000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.14.0-49.el7.centos.180925+amp.ilp32.aarch64 xhci-hcd
usb usb1: SerialNumber: 808622B7:00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd 808622B7:00: xHCI Host Controller
xhci-hcd 808622B7:00: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.14.0-49.el7.centos.180925+amp.ilp32.aarch64 xhci-hcd
usb usb2: SerialNumber: 808622B7:00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd 808622B7:01: xHCI Host Controller
xhci-hcd 808622B7:01: new USB bus registered, assigned bus number 3
xhci-hcd 808622B7:01: hcc params 0x0220fe6d hci version 0x110 quirks 0x00010010
xhci-hcd 808622B7:01: irq 296, io mem 0x13900000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.14.0-49.el7.centos.180925+amp.ilp32.aarch64 xhci-hcd
usb usb3: SerialNumber: 808622B7:01
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd 808622B7:01: xHCI Host Controller
xhci-hcd 808622B7:01: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.14.0-49.el7.centos.180925+amp.ilp32.aarch64 xhci-hcd
usb usb4: SerialNumber: 808622B7:01
hub 4-0:1.0: USB hub found
hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
mousedev: PS/2 mouse device common for all mice
rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
xgene-pmu APMC0D83:00: X-Gene PMU version 3
xgene-pmu APMC0D83:00: l3c0 PMU registered
xgene-pmu APMC0D83:00: l3c1 PMU registered
xgene-pmu APMC0D83:00: l3c2 PMU registered
xgene-pmu APMC0D83:00: l3c3 PMU registered
xgene-pmu APMC0D83:00: l3c4 PMU registered
xgene-pmu APMC0D83:00: l3c5 PMU registered
xgene-pmu APMC0D83:00: l3c6 PMU registered
xgene-pmu APMC0D83:00: l3c7 PMU registered
xgene-pmu APMC0D83:00: mcb0 PMU registered
xgene-pmu APMC0D83:00: mcb1 PMU registered
xgene-pmu APMC0D83:00: mc0 PMU registered
xgene-pmu APMC0D83:00: mc1 PMU registered
xgene-pmu APMC0D83:00: mc2 PMU registered
xgene-pmu APMC0D83:00: mc3 PMU registered
xgene-pmu APMC0D83:00: mc4 PMU registered
xgene-pmu APMC0D83:00: mc5 PMU registered
xgene-pmu APMC0D83:00: mc6 PMU registered
xgene-pmu APMC0D83:00: mc7 PMU registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
usb 1-1: new high-speed USB device number 2 using xhci-hcd
NET: Registered protocol family 17
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: 2df34c1f3282a979b9ba92b0abfa544ec4a77501'
Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80'
Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8'
zswap: loaded using pool lzo/zbud
Key type big_key registered
pcieport 0000:00:00.0: Ampere eMAG IOMMU detected, forcing passthrough mode
iommu: Adding device 0000:00:00.0 to group 0, default domain type 4
pcieport 0000:00:00.0: Signaling PME with IRQ 301
pcieport 0000:00:00.0: AER enabled with IRQ 301
pcieport 0002:00:00.0: Ampere eMAG IOMMU detected, forcing passthrough mode
iommu: Adding device 0002:00:00.0 to group 1, default domain type 4
pcieport 0002:00:00.0: Signaling PME with IRQ 302
pcieport 0002:00:00.0: AER enabled with IRQ 302
pcieport 0004:00:00.0: Ampere eMAG IOMMU detected, forcing passthrough mode
iommu: Adding device 0004:00:00.0 to group 2, default domain type 4
pcieport 0004:00:00.0: Signaling PME with IRQ 303
pcieport 0004:00:00.0: AER enabled with IRQ 303
pcieport 0006:00:00.0: Ampere eMAG IOMMU detected, forcing passthrough mode
iommu: Adding device 0006:00:00.0 to group 3, default domain type 4
pcieport 0006:00:00.0: Signaling PME with IRQ 304
pcieport 0006:00:00.0: AER enabled with IRQ 304
pcieport 0007:00:00.0: Ampere eMAG IOMMU detected, forcing passthrough mode
iommu: Adding device 0007:00:00.0 to group 4, default domain type 4
pcieport 0007:00:00.0: Signaling PME with IRQ 305
pcieport 0007:00:00.0: AER enabled with IRQ 305
pcieport 0007:01:00.0: Ampere eMAG IOMMU detected, forcing passthrough mode
iommu: Adding device 0007:01:00.0 to group 5, default domain type 4
rtc-efi rtc-efi: setting system clock to 2018-12-04 17:50:09 UTC (1543945809)
Freeing unused kernel memory: 1024K
usb 1-1: New USB device found, idVendor=0424, idProduct=2514
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
systemd[1]: Detected architecture arm64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff01
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: Virtual Hub
usb 1-1.1: Manufacturer: American Megatrends Inc.
usb 1-1.1: SerialNumber: serial
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 5 ports detected
device-mapper: uevent: version 1.0.3
usb 1-1.1.1: new high-speed USB device number 4 using xhci-hcd
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
usb 1-1.1.1: New USB device found, idVendor=046b, idProduct=ff20
usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1.1: Product: Virtual Cdrom Device
usb 1-1.1.1: Manufacturer: American Megatrends Inc.
usb 1-1.1.1: SerialNumber: AAAABBBBCCCC1
ahci APMC0D33:00: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
ahci APMC0D33:00: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sadm sds apst
scsi host0: ahci
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igb 0006:01:00.0: Ampere eMAG IOMMU detected, forcing passthrough mode
iommu: Adding device 0006:01:00.0 to group 6, default domain type 4
usb 1-1.1.2: new high-speed USB device number 5 using xhci-hcd
ast 0007:02:00.0: Ampere eMAG IOMMU detected, forcing passthrough mode
iommu: Adding device 0007:02:00.0 to group 5, default domain type 4
ast 0007:02:00.0: enabling device (0002 -> 0003)
[drm] Using P2A bridge for configuration
[drm] AST 2500 detected
[drm] Analog VGA only
[drm] dram MCLK=800 Mhz type=7 bus_width=16 size=01000000
[TTM] Zone kernel: Available graphics memory: 66520320 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
checking generic (430000000 1e0000) vs hw (430000000 1000000)
fb: switching to astdrmfb from EFI VGA
Console: switching to colour dummy device 80x25
scsi host1: ahci
ata1: SATA max UDMA/133 mmio [mem 0x1c000000-0x1c000fff] port 0x100 irq 293
ata2: SATA max UDMA/133 mmio [mem 0x1c000000-0x1c000fff] port 0x180 irq 293
ahci APMC0D33:01: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
ahci APMC0D33:01: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sadm sds apst
scsi host2: ahci
scsi host3: ahci
ata3: SATA max UDMA/133 mmio [mem 0x1c100000-0x1c100fff] port 0x100 irq 294
ata4: SATA max UDMA/133 mmio [mem 0x1c100000-0x1c100fff] port 0x180 irq 294
xgene-slimpro-i2c APMC0D40:00: Mailbox I2C Adapter registered
xgene-slimpro-i2c APMC0D40:01: Mailbox I2C Adapter registered
usb 1-1.1.2: New USB device found, idVendor=046b, idProduct=ffb0
usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1.2: Product: Virtual Ethernet
usb 1-1.1.2: Manufacturer: American Megatrends Inc.
usb 1-1.1.2: SerialNumber: 1234567890
pps pps0: new PPS source ptp0
igb 0006:01:00.0: added PHC on eth0
igb 0006:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0006:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:1b:21:de:8c:b6
igb 0006:01:00.0: eth0: PBA No: G69016-005
igb 0006:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0006:01:00.0 enP6p1s0: renamed from eth0
usb 1-1.1.3: new high-speed USB device number 6 using xhci-hcd
Console: switching to colour frame buffer device 128x48
ast 0007:02:00.0: fb0: astdrmfb frame buffer device
usb 1-1.1.3: New USB device found, idVendor=046b, idProduct=ff31
usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1.3: Product: Virtual HardDisk Device
usb 1-1.1.3: Manufacturer: American Megatrends Inc.
usb 1-1.1.3: SerialNumber: AAAABBBBCCCC3
[drm] Initialized ast 0.1.0 20120228 for 0007:02:00.0 on minor 0
ata2: SATA link down (SStatus 0 SControl 330)
ata4: SATA link down (SStatus 0 SControl 330)
ata1: SATA link down (SStatus 0 SControl 330)
usb 1-1.1.4: new low-speed USB device number 7 using xhci-hcd
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: LPM support broken, forcing max_power
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: ATA-11: Samsung SSD 860 PRO 256GB, RVM01B6Q, max UDMA/133
ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: LPM support broken, forcing max_power
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: configured for UDMA/133
ahci APMC0D33:01: port does not support device sleep
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: Enabling discard_zeroes_data
sda: sda1 sda2 sda3
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sda] Attached SCSI disk
usb 1-1.1.4: New USB device found, idVendor=046b, idProduct=ff10
usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.4: Product: Virtual Keyboard and Mouse
usb 1-1.1.4: Manufacturer: American Megatrends Inc.
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/platform/808622B7:00/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/0003:046B:FF10.0001/input/input1
hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-808622B7:00-1.1.4/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/platform/808622B7:00/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:046B:FF10.0002/input/input2
hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-808622B7:00-1.1.4/input1
usb-storage 1-1.1.1:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-1.1.1:1.0
usb-storage 1-1.1.3:1.0: USB Mass Storage device detected
scsi host5: usb-storage 1-1.1.3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usbcore: registered new interface driver cdc_ether
rndis_host 1-1.1.2:1.0 usb0: register 'rndis_host' at usb-808622B7:00-1.1.2, RNDIS device, 06:2f:96:e3:36:5c
usbcore: registered new interface driver rndis_host
SGI XFS with ACLs, security attributes, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Ending clean mount
systemd-journald[308]: Received SIGTERM from PID 1 (systemd).
systemd: 20 output lines suppressed due to ratelimiting
systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
scsi 4:0:0:0: CD-ROM AMI Virtual CDROM0 1.00 PQ: 0 ANSI: 0 CCS
scsi 5:0:0:0: Direct-Access AMI Virtual HDisk0 1.00 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: [sdb] Attached SCSI removable disk
systemd-journald[592]: Received request to flush runtime journal from PID 1
xgene-slimpro-hwmon APMC0D29:00: APM X-Gene SoC HW monitor driver registered
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: probing via SPMI
ipmi_si: Unable to find any System Interface(s)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
scsi 4:0:0:0: Attached scsi generic sg2 type 5
IPMI SSIF Interface driver
ipmi_ssif: probe of dmi-ipmi-ssif.0 failed with error -17
ipmi_ssif: Trying ACPI-specified SSIF interface at i2c address 0x10, adapter Synopsys DesignWare I2C adapter, slave address 0x20
sbsa-gwdt sbsa-gwdt.0: Initialized with 10s timeout @ 50000000 Hz, action=0.
sr 4:0:0:0: [sr0] scsi-1 drive
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
random: crng init done
CPU features: CPU10: missing feature: 32-bit EL0 Support
CPU10: will not boot
XFS (sda2): Mounting V5 Filesystem
XFS (sda2): Ending clean mount
ipmi_ssif i2c-APMC0D8A:00: Found new BMC (man_id: 0x0005b2, prod_id: 0x8840, dev_id: 0x20)
CPU10: failed to come online
psci: CPU10 killed.
CPU10: died during early boot
IPMI System Interface driver.
ipmi_si: probing via SPMI
ipmi_si: Unable to find any System Interface(s)
CPU features: CPU20: missing feature: 32-bit EL0 Support
CPU20: will not boot
CPU20: failed to come online
psci: CPU20 killed.
CPU20: died during early boot
CPU features: CPU15: missing feature: 32-bit EL0 Support
CPU15: will not boot
CPU15: failed to come online
psci: CPU15 killed.
CPU15: died during early boot
CPU features: CPU18: missing feature: 32-bit EL0 Support
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
CPU18: will not boot
CPU18: failed to come online
psci: CPU18 killed.
CPU18: died during early boot
CPU features: CPU23: missing feature: 32-bit EL0 Support
CPU23: will not boot
CPU23: failed to come online
psci: CPU23 killed.
CPU23: died during early boot
CPU features: CPU30: missing feature: 32-bit EL0 Support
CPU30: will not boot
CPU30: failed to come online
psci: CPU30 killed.
CPU30: died during early boot
CPU features: CPU31: missing feature: 32-bit EL0 Support
CPU31: will not boot
CPU31: failed to come online
psci: CPU31 killed.
CPU31: died during early boot
CPU features: CPU13: missing feature: 32-bit EL0 Support
CPU13: will not boot
CPU13: failed to come online
psci: CPU13 killed.
CPU13: died during early boot
CPU features: CPU14: missing feature: 32-bit EL0 Support
CPU14: will not boot
CPU14: failed to come online
psci: CPU14 killed.
CPU14: died during early boot
CPU features: CPU22: missing feature: 32-bit EL0 Support
CPU22: will not boot
CPU22: failed to come online
psci: CPU22 killed.
CPU22: died during early boot
CPU features: CPU7: missing feature: 32-bit EL0 Support
CPU7: will not boot
CPU7: failed to come online
psci: CPU7 killed.
CPU7: died during early boot
CPU features: CPU21: missing feature: 32-bit EL0 Support
CPU21: will not boot
CPU21: failed to come online
psci: CPU21 killed.
CPU21: died during early boot
CPU features: CPU4: missing feature: 32-bit EL0 Support
CPU4: will not boot
CPU4: failed to come online
psci: CPU4 killed.
CPU4: died during early boot
CPU features: CPU24: missing feature: 32-bit EL0 Support
CPU24: will not boot
Adding 4194240k swap on /dev/mapper/centos_osprey09--ospa2--a00133-swap. Priority:-2 extents:1 across:4194240k SSFS
CPU24: failed to come online
psci: CPU24 killed.
CPU24: died during early boot
IPMI System Interface driver.
ipmi_si: probing via SPMI
ipmi_si: Unable to find any System Interface(s)
CPU features: CPU27: missing feature: 32-bit EL0 Support
CPU27: will not boot
XFS (dm-2): Mounting V5 Filesystem
XFS (dm-2): Ending clean mount
IPv6: ADDRCONF(NETDEV_UP): enP6p1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enP6p1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
CPU27: failed to come online
psci: CPU27 killed.
CPU27: died during early boot
CPU features: CPU19: missing feature: 32-bit EL0 Support
CPU19: will not boot
CPU19: failed to come online
psci: CPU19 killed.
CPU19: died during early boot
RPC: Registered named UNIX socket transport module.
CPU features: CPU5: missing feature: 32-bit EL0 Support
CPU5: will not boot
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
CPU5: failed to come online
psci: CPU5 killed.
CPU5: died during early boot
CPU features: CPU8: missing feature: 32-bit EL0 Support
CPU8: will not boot
igb 0006:01:00.0 enP6p1s0: igb: enP6p1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enP6p1s0: link becomes ready
CPU8: failed to come online
psci: CPU8 killed.
CPU8: died during early boot
CPU features: CPU12: missing feature: 32-bit EL0 Support
CPU12: will not boot
CPU12: failed to come online
psci: CPU12 killed.
CPU12: died during early boot
CPU features: CPU25: missing feature: 32-bit EL0 Support
CPU25: will not boot
CPU25: failed to come online
psci: CPU25 killed.
CPU25: died during early boot
CPU features: CPU26: missing feature: 32-bit EL0 Support
CPU26: will not boot
CPU26: failed to come online
psci: CPU26 killed.
CPU26: died during early boot
CPU features: CPU29: missing feature: 32-bit EL0 Support
CPU29: will not boot
CPU29: failed to come online
psci: CPU29 killed.
CPU29: died during early boot
CPU features: CPU9: missing feature: 32-bit EL0 Support
CPU9: will not boot
CPU9: failed to come online
psci: CPU9 killed.
CPU9: died during early boot
CPU features: CPU11: missing feature: 32-bit EL0 Support
CPU11: will not boot
CPU11: failed to come online
psci: CPU11 killed.
CPU11: died during early boot
CPU features: CPU17: missing feature: 32-bit EL0 Support
CPU17: will not boot
CPU17: failed to come online
psci: CPU17 killed.
CPU17: died during early boot
CPU features: CPU16: missing feature: 32-bit EL0 Support
CPU16: will not boot
CPU16: failed to come online
psci: CPU16 killed.
CPU16: died during early boot
CPU features: CPU28: missing feature: 32-bit EL0 Support
CPU28: will not boot
CPU28: failed to come online
psci: CPU28 killed.
CPU28: died during early boot
CPU features: CPU6: missing feature: 32-bit EL0 Support
CPU6: will not boot
CPU6: failed to come online
psci: CPU6 killed.
CPU6: died during early boot